|
|
-
Material of Construction: 55304, 55316, Brass, M.S. -
End Connections: Threaded / SW / Tube equipment & ferrule. -
Size: 1/4” & 1” -
Threads: NPT / BSPT / BSP / Metric -
Pressure Rating: 3000lbs, 6000lbs, 9000lbs -
Pressure Testing: Pneumatic & Hydro test. -
Marking: Size, Threading, Metal & Manufacturer's Name / Logo. -
Mounting: - Panel mtg. type with check nut oubonnet
- Surface mtg. type with tow nos. tapped holes at the bottom of body.
- Without any provision for mounting.
|
Needle Valve
We manufacture inst. needle valves of highest quality as per specifications given below:
Material of construction: SS304,SS316, BRASS, M.S.
End connection: threaded/sw/tube end with nut and ferrule or any combination.
Size: 1/4" thru 1"
Threads: NPT/BSPT/BSPP/METRIC
Pressure rating: 3000 LBS,6000 LBS, 9000 LBS.
Pressure testing: pneumatic for seat leakage and hydro for body and seat.
Stem point: Non rotating for 1/2" size and above.
Marking: Size, threading, matl., manufacturer's name/logo, direction of flow.
Mounting: panel mtg. with check nut on bonnet, surface mtg. with the help of two screws at the bottom, diagonally opposite/No provision of mtg.
T/C: Shall be provided for material chemical analysis, pressure test results. |
|
|
|
Gate Valve
Gate Valve, Slide Valves, Parallel Slide Valves, Knife Gate Valves, Gate Valve Manufacturers, Rising Stem .The most common and traditional type of valve. The valves are large to accommodate the yoke and stem mechanism, but fully open the full bore design provides an uninterrupted flow path. Generally either used fully open or closed, for on off isolation, and not used for modulating flow control duties. Variants include Solid and Flexible Wedge Gates, Double Disc Gates, Through Conduit Valves, Parallel Slide Valves and Knife Gate Valves |
|
|
|
Non-Return/Check Valve
We manufacture uni-directional valves for instrumentation systems used in process plants. These are made in stainless steel grade 304/316.The ends are any combinations of male and female threads, NPT/BSPT/BSP. These are leak proof and have a very low cracking pressure. |
|
|
|
|
|
|
